En de las cosas más importantes que hacer con un Rover / MG / motor Freelander serie K es verificar regularmente el agua – un problema descubierto a tiempo podría ahorrarle mucho dinero! Así que ha sido regularmente verificando el nivel del agua y todo ha ido bien, hasta que un día usted comprobar y se ha usado más de lo normal. ¿Qué puede ser?
Si todas las demás condiciones conducción son normales como – es que no estuviste trabajando lo más duro de lo habitual por lo que puede haber utilizado naturalmente más agua – entonces hay pocos lugares donde el agua podría estar huyendo de:
- Podría ser la Junta de la culata. Si este es el caso se puede ver una fuga alrededor de la cabeza del cilindro, sin embargo puede escapar el agua en el aceite – esto aparecería como un residuo de color mayonesa dentro del aceite, a menudo visto en el tapón del depósito de aceite.
- Puede ser que tu agua bomba escaparse a través de un sello usado o del cojinete. En esta situación tendería a encontrar que gotea después de que el coche ha sido conducido. En un Rover / MG / motor Freelander serie K el goteo se verían en el lado del conductor en la parte delantera del motor; en el Rover / MG / Freelander K V6 motor el goteo se verían en el lado del conductor en la parte trasera del motor.
- La caja del termostato puede estar rajado o han usado los sellos. Si el agua se escapa de la caja del termostato esperarías ver el agua por goteo de la parte posterior del motor debajo del colector de admisión para un Rover / MG / motor Freelander serie K. Con el Rover / MG / Freelander K V6 motor la caja del termostato está en el centro de la V para que el agua que gotee en el V y luego puede gotear en la parte trasera del motor. Con el motor V6 de K puede ser difícil saber desde donde el goteo de la caja del termostato o la bomba de agua.
- Podría ser la fuga del radiador, por lo tanto podría ser goteando desde, bueno, el radiador!
- Las tuberías de refrigeración podrían verse debilitadas, causándoles a split, o los clips de las tuberías han aflojado y ya no son lo suficientemente fuertes para contener la presión del agua se expande. En cualquiera de estas situaciones es un caso de comprobación de gotas de cualquiera de las tuberías de refrigeración en el compartimento motor.
- Puede haber una fuga en tu matriz de calentador. Generalmente si tu matriz calentador está goteando encontrará el pie bien dentro del coche se convierte en húmedo.
- La fuga puede provenir de la Junta del múltiple de admisión. Compruebe que el agua que gotea de alrededor el colector de admisión.
- En un Freelander podría estar goteando en el IRD si la placa de enfriamiento se ha dañado. Compruebe la manguera del respiradero de la unidad de IRD – si este es el caso entonces usted no verá un goteo de agua como la fuga es interna a la unidad IRD.
- Tal vez la peor causa de una fuga de agua es una grieta en uno de los trazadores de líneas del cilindro. En esta situación podría estar goteando en el propio motor. Escapan a menudo sólo pequeñas cantidades de agua en el motor que puede significar que los rastros de agua en el aceite no son obvios.
Para enfriamiento eficaz la Rover / MG / motor Freelander serie K requiere el refrigerante rojo para ser utilizado, y cuando se trata de determinar donde una fuga es a menudo esto puede ser muy beneficioso como si la fuga está goteando externamente dejará manchas rosa alrededor de la zona del goteo.
Pero don ’ pánico t, podemos ayudar!
Hi I have a 2003 mg zt 1.8 turbo with 102000 miles on. 2 years ago it had the triple layer head gasket upgrade so I’m a little stumped by my latest fault? When the car has been stood and gone cold and I start it up I get quite a lot of white smoke which stops once it has started to build up temp. Any help with this would be taken onboard with many thanks Wayne
Hi Wayne,
Apologies for the delay in responding.
This sounds very much like an issue with your cylinder liners. If your MG overheated previously it could be that they were compromised then and are only now showing the signs.
All the best,
Sue
0780 9575 421
have a 2002 1.8 freelander , straight through mot the other day coming back started to get hot lot of pressure in the hoses and header tank, it has a new tank and replacement thermostat on the front of engine , no smoke or water leek apart from boiling up in tank, fine on tick over just when going up hill gets hot could this still be head gasket or something else
Hi I have rover 75 2.5lt v6 24v and the temperature gauge keeps going up and down I have noticed a drip of water under drives seat but theres no white scum. Under oil cap nor can I see any water in the header tank is the rover dead?
Hi Peter,
Apologies for the delay in responding, somehow your comment slipped through the net.
This does sound like a head gasket issue with exhaust gases going into the cooling system unfortunately.
All the best,
Sue
+44-780-9575-421
Hi Scott,
Is the drip by the driver’s seat happening inside the car? If so then you should check if the heater matrix is leaking.
If there is no coolant in the header tank then fill it up to the maximum and keep a close eye on it.
Have you checked for signs of a leak in the V of the engine? If it is leaking there then it will be the thermostat housing, which is a fairly common issue as they are plastic housings positioned in the hottest part of the engine. We do have a modification for this in terms of a metal thermostat housing and pipes – not cheap but a much better solution.
All the best,
Sue
+44-780-9575-421
Hi.
i have been following the thread with regards to the rover 75 2.5l v6. Iv got a leaking thermostat housing i do not want to replace it with another plastic unit.
I saw somebody mentioned a better unit thats available how would i be able to get my hands on a unit and what is the pricing.
Im in south africa cape town.
If anyone has any information please contact me. Laeeqolivergti@gmail.com
Im not sure if this is a local forum.
Hi Laeeq,
We can supply you with the metal thermostat kit which includes the metal thermostat housing and the associated pipes. We are based in the UK. The kit is £245.83 and shipping to South Africa is £45 by courier.
All the best,
Sue
+44-780-9575-421
Hi guys, fairly new to owning a car so bear with me. Recently I bought a 2003 mg ZT+, when I did my checks the coolant seemed empty and the oil too so I topped them both up. Got the car insured this Friday just gone so naturally I was driving all day to get used to it. Later I noticed the fan was coming on a lot and when I popped the bonnet to get a bit of air to it I noticed a little smoke, nothing major. On the way home the engine overheated and the temp gauge was at maximum. When I checked the coolant the bottle was empty. Waited till next morning and topped up the coolant again, but when I looked under the car it looked like coolant was leaking fromwhat looks like the sump. I’ve checked the oil and all seems fine, no build up no residue. Had it to 2 garages and I’ve been told it’s head gasket failure by one and heater matrix by another. The footwells not wet though. I’m thinking airlock but not sure, please help!!!
Hi Chris,
If the leak is external, i.e. you can see that coolant is coming out then it is most likely a leak from the water pump or the thermostat housing. It is possible for the head gasket to leak externally but it is more common for it to cross contaminate into the oil. Sine you can see coolant leaking check the water pump and thermostat, if you have red coolant in the system (which is the coolant you should use) then you should be able to see the pink residue around where it leaks. If you are having difficulty then it could be worth doing a pressure test on the cooling system.
All the best,
Sue
+44-780-9575-421
Colleagues,
I have numerous leaking & overheating problems with my Freelander K – Series, 16 V , Petrol. The best medicine , that I believe will save me time, money and ‘ stress’ , is to’ down the engine ‘ , then just re- build the engine.
Yes ! Sounds strange to some, but once these engines go around 100 000 miles, leaks,overheating head gasket issues/ problems are inevitable.
I am re- building mine & have bought the re- built kit components … almost all in place save for the Head Bolt set and Cam belt tensioner. This will enable me to inspect all the internal components & replace them if need be.
Hope to share the results after engine re- built. Thanks for sharing the possible causes of water loss.
I love my Freelander ! It shall be well !
4×4 by FAR ! 🙂
http://www.roverkseries.com/rover-k-series/rover-k-series-reconditioned-engine-1-8-litre-petrol-rover-25-45-75-200-400
Hi Mr Q.
We look forward to hearing how you get on with your engine rebuild. The Freelanders are certainly great vehicles.
All the best,
Sue
+44-780-9575-421
I seem to have a lot of coolant being omitted from the exhaust. I ve changed the inlet manifold gasket. It s had new top and bottom hoses and a brand new radiator because the old ones were shot. The oil and water have not mixed together and it doesn’t t overheat
Would the excess coolant from exhaust be the headgasket on it s way out? Thanks
Hi i hv a rover 75 V6 . Did change the thermostat housing as it was leaking. Now when i fill the radiator and drive with the car it looks like the cooling system build up pressure even when the car is cold in the morning and i open the cap the water push out of the radiator can anyone tell me what can be wrong
Hi Johan,
Did you bleed the cooling system when you changed the thermostat? Is the bottom radiator hose getting hot when the car is up to normal operating temperature? Are the fans coming on when they should?
All the best,
Sue
+44-780-9575-421
Hello T.Martin,
It sounds like your cylinder liners may have dropped or cracked if it is the 1.8 K-series engine.
All the best,
Sue
Hi hope you can help. I have a non turbo 1.8 MG ZT and it uses or loses a litre of water. No sign of visible leaks no steam from exhaust or oil scum red coolant just disappears. No engine error codes had recent water pump when cam belt wad done and inlet manifold gasket is replaced. I have checked hose connections am totally perplexed.
Hi Stephen,
My profound apologies, your message found its way into our Spam folder. Have you sorted this problem out or do you still need help?
All the best,
Sue
0780 9575 421