A ta Freelander făcut 72,000 km sau mai mult?
A ta Rover / MG făcut 60.000 km sau mai mult?
A face tu nevoie să vă asiguraţi că face un alt 60.000 / 72000 mile?
Vă putem ajuta!
Don ’ t ia sansa de centura calendarul se rupă – dacă se întâmplă acest lucru vă sunt susceptibile de a face grave, şi eventual ireparabile motor prejudiciul, care ar costa mii pentru a repara!
Freelander noastre / Rover / MG 1.8 K seria benzină calendarul centura & apă pompa de înlocuire este doar
£295
Centura calendarul înlocuit în timp util a lua – Land Rover ’ s recomandare este fiecare 72,000 km, Rover / MG recomandare este fiecare 60.000 km sau la fiecare 6 ani, oricare este mai devreme.
Ce este inclus în dumneavoastră curele & apă pompa de înlocuire?
Centură de sincronizare (cam centura) controlează calendarul de motorul ’ s supape.
Dumneavoastră calendarul centura de înlocuire include echiparea cu o complet calendarul centura kit – centură de sincronizare şi Întinzător.
Echiparea cu o pompă de apă nouă este, de asemenea, inclus.
Din moment ce ne-am specializat în aceste motoare care mai bine pentru a se asigura că vă centură de sincronizare este temporizat perfect? Avem echipament specializat şi cunoştinţe locuri de muncă.
unde eşti?
Ne sunt bazate în Norfolk, cod poştal IP26 4RH.
Daca nu ’ t au un lift acasă după fixarea masina ta cu noi, şi sunt în căutarea de a folosi transportul public, ne poate vă picătură / ridica-te la gară – nostru cel mai apropiat este Brandon, cu toate acestea dacă vin prin Londra există o linie directă de tren la Downham Market, care nu este prea departe de ambele. Dacă Thetford este mai convenabil pentru tine, de asemenea, acest lucru este posibil.
Suntem mai degrabă în mijlocul de nicaieri, dar dacă aveţi nevoie să aşteptaţi pentru masina ta există unele plimbări plăcute în zonă.
Cât timp va dura?
Pentru a înlocui dumneavoastră calendarul centura ia, în general, mai puţin de trei ore.
Cum pot plăti pentru meu calendarul centura de înlocuire?
Pic dureros stiu! Dar am dori să vă dau alegerea cât mai mult posibil, astfel încât vom accepta:
- Numerar la colecţie (întotdeauna frumos!)
- Toate principalele carti de Credit (inclusiv AMEX) – prin telefon sau colecţie
- Transfer bancar direct
- PayPal
- Cecuri – cu condiţia ei clar înainte de livrarea sau colectarea de
Ce se întâmplă dacă ceva nu merge bine?
Ne don ’ t ca lucrurile merg prost, şi cu siguranţă aş ’ t! Calitatea este importantă pentru noi, dar în caz că ceva merge prost ai noştri
12 luni, kilometraj nelimitat de garanţie.
Garanţia noastră vă acoperă pentru componente şi muncii în caz de orice defectare a unei componente din cauza unor circumstanţe neprevăzute. Aduce doar masina ta înapoi la noi şi vom sorta că.
hi
i am based in australia, i have a 98 freelander and the head gasket just went. land rover want $2000+ to fix it which is prohibitive and not possible.
i have plenty of mechanicl experience, but was wondering if there was anything special or tricky about replacing the gasket myself.
any advice would be appreciated.
thanks
brad
Hi Brad,
I assume given the year of your Freelander and the problem you have with it that it is a 1.8 litre petrol model. If you have plenty of mechanical experience then there is no particularly tricky issues in dealing with this models head gasket. Make sure you get the head skimmed and pressure tested at a machine shop and ensure that you use the modified multi layer head gasket and not the single layer one (otherwise you will find yourself with the same problem again within another 70,000 miles). Also ensure that you use an engine flush and a coolant flush on the system to get rid of any residues and check there are no blockages. Never use any sealing additives in these engine, such a K-seal, they cause havoc!
If you have any issues as you are replacing the head gasket just get in touch and we will do our best to help.
All the best,
Sue
+44-780-9575-421
hi is that true when head is skimed you also need new bolts?becose garage told me old bolts not doing the joob
for 1.8 freelander
Hi Valdas,
Yes, it is true. The bolts are stretch bolts and hence should not be reused.
All the best,
Sue
HI IM STUGLING WITH MY 1.8.
CANT SNAP HOW THE TIMING MARKS ON THE CAMS SEPOSE TO BE
Hi Gawie,
Apologies for the delay in responding.
When facing the engine from the drivers side the IN, marked on the cam shaft pulley on the left hand side, should face the EXHAUST, marked on the cam shaft pulley on the right hand side.
Using the mark on the back plastic cover, mounted on the head cylinder, align the crank shaft pulleys to the mark.
For more detailed help the Haynes manual can give you steps and diagrams (http://www.freelanderspecialist.com/freelander-service/freelander-1-service-and-repair-manuals)
All the best,
Sue
0780 9575 421