Urobila vaša Freelander 72.000 míľ alebo viac?
Má vaša Rover / MG urobil 60.000 míľ alebo viac?
Chceš sa uistite sa, že to robí iný 60.000 / 72.000 míľ?
Môžeme pomôcť!
Don ’ t riskovať svoje remeňa štekať – ak to sa stane, budete pravdepodobne robiť vážne a prípadne nenapraviteľné motor poškodenie, ktoré by stálo tisíce opraviť!
Naše Freelander / Rover / MG 1,8 K sérii benzín načasovanie pás & vodné čerpadlo náhradné je len
£295
Dostať vaše remeňa nahradiť včas – Land Rover ’ s odporúčaním je každý 72.000 km, Rover / MG odporúčanie je každý 60.000 míľ alebo každých 6 rokov, čo nastane skôr.
Čo je súčasťou vášho remeňa & vodné čerpadlo náhradné?
Rozvodový remeň (cam pás) ovláda načasovanie vášho motora ’ s ventilmi.
Vaša načasovanie pás náhradné zahŕňa montáž súpravy pásu úplné časovanie – remeňa a napínacie.
Súčasťou dodávky je montáž nové vodné čerpadlo.
Odvtedy sme sa špecializujú na týchto motorov, ktorí lepšie zabezpečiť dokonale načasované Rozvodový remeň? Máme špecializované zariadenia a znalosti pre prácu.
kde si?
Sídlime v Norfolku, PSČ IP26 4RH.
Ak ste don ’ t výťahom domov po zhodenie vaše auto s nami, a chcú používať verejnú dopravu, môžeme ťa / vás vyzdvihnúť na železničnej stanici – našich najbližších je Brandon, Avšak ak idete cez Londýn je priame vlakové linky z Downham Market, ktorá nie je príliš ďaleko. Ak Thetford je výhodnejšie pre vás, to je tiež možné.
Sme skôr uprostred ničoho, ale ak budete musieť čakať na vaše auto existuje niekoľko príjemných prechádzok v oblasti.
Ako dlho to bude trvať?
Nahradiť vaše načasovanie pás zvyčajne trvá menej ako tri hodiny.
Ako môžem zaplatiť za môj náhradný pás načasovanie?
Bolestivé trochu viem! Ale sme radi, aby toľko voľba ako je to možné, akceptujeme:
- Hotovosť na zber (vždy pekné!)
- Všetky hlavné kreditné karty (vrátane AMEX) – po telefóne alebo v kolekcii
- Priamy bankový prevod
- Paypal
- Šeky – predpokladu budú jasné pred dodávka alebo zber
Čo ak sa niečo pokazí?
My don ’ t, ako to ide zle, a určite by som ’ t! Kvalita je pre nás dôležité, ale v prípade niečo pokazí máte našich
12 mesiac záruka neobmedzené kilometre.
Naša záruka pokrýva diely a práce v prípade nesplnenia zložky pre nepredvídateľných okolností. Stačí uviesť vaše auto späť k nám a vyriešime to.
hi
i am based in australia, i have a 98 freelander and the head gasket just went. land rover want $2000+ to fix it which is prohibitive and not possible.
i have plenty of mechanicl experience, but was wondering if there was anything special or tricky about replacing the gasket myself.
any advice would be appreciated.
thanks
brad
Hi Brad,
I assume given the year of your Freelander and the problem you have with it that it is a 1.8 litre petrol model. If you have plenty of mechanical experience then there is no particularly tricky issues in dealing with this models head gasket. Make sure you get the head skimmed and pressure tested at a machine shop and ensure that you use the modified multi layer head gasket and not the single layer one (otherwise you will find yourself with the same problem again within another 70,000 miles). Also ensure that you use an engine flush and a coolant flush on the system to get rid of any residues and check there are no blockages. Never use any sealing additives in these engine, such a K-seal, they cause havoc!
If you have any issues as you are replacing the head gasket just get in touch and we will do our best to help.
All the best,
Sue
+44-780-9575-421
hi is that true when head is skimed you also need new bolts?becose garage told me old bolts not doing the joob
for 1.8 freelander
Hi Valdas,
Yes, it is true. The bolts are stretch bolts and hence should not be reused.
All the best,
Sue
HI IM STUGLING WITH MY 1.8.
CANT SNAP HOW THE TIMING MARKS ON THE CAMS SEPOSE TO BE
Hi Gawie,
Apologies for the delay in responding.
When facing the engine from the drivers side the IN, marked on the cam shaft pulley on the left hand side, should face the EXHAUST, marked on the cam shaft pulley on the right hand side.
Using the mark on the back plastic cover, mounted on the head cylinder, align the crank shaft pulleys to the mark.
For more detailed help the Haynes manual can give you steps and diagrams (http://www.freelanderspecialist.com/freelander-service/freelander-1-service-and-repair-manuals)
All the best,
Sue
0780 9575 421