Sayın Freelander 72.000 mil veya daha yaptı mı?
Your Rover vardır / MG 60.000 mil veya daha fazlasını yaptın mı?
Başka bir 60,000 yapar emin olmak istiyorum yapmak / 72.000 mil?
Biz yardımcı olabiliriz!
Don ’ t almak yapışma, triger kayışı şans – bu sen are ciddi yapmak olasılığı ve düzeltmek için binlerce mal olacak büyük olasılıkla onarılamaz motor hasar olursa!
Bizim Freelander / Rover / MG 1.8 K serisi benzin zamanlama kemer & su pompası yerine sadece
295 £
Zamanında yerine, triger kayışı al – Land Rover ’ s tavsiyem her 72.000 km, Rover / MG öneri her 60.000 km veya 6 yılda, hangisi daha önce ise.
Triger kayışı ve su pompası yedek olarak neler dahildir?
Triger kayışı (cam kemer) zamanlama motorunuzun kontrol ediyor. ’ s vanalar.
Senin zamanlama kemer yerine tam zamanlama kemer kiti montaj içerir – triger kayışı ve Gergi.
Yeni bir su pompası montaj da içerir.
Beri daha iyi bir triger kayışı kadar mükemmel zamanlandı emin olun bu motorlar içinde uzmanlaşma? Biz uzman ekipman ve iş için bilgiye sahip.
Neredesin?
Norfolk, posta kodu IP26 4RH temel alır.
Eğer ’ t araç ile bize bırakarak sonra eve bırakmamı ve toplu taşıma araçları kullanmak için arıyoruz, biz sana bırak / tren istasyonunda almak – ancak Londra geliyorsanız direkt tren hattı çok uzak da değil Downham Market, Brandon, bizim en yakın olan. Thetford sizin için daha uygunsa. bu da mümkündür.
Biz oldukça ıssız, ama araç için beklemek gerekir Eğer orada alanında bazı keyifli yürüyüşler.
Ne kadar sürer?
Kemer zamanlama değiştirmek için genellikle üç saatten az sürer.
Benim zamanlama kemer değiştirme için ödemeyi nasıl yapabilirim?
Biliyorum acı bit! Ancak kabul ediyoruz Bu yüzden mümkün olduğu kadar çok seçenek sunmak istiyorum:
- Para toplama (her zaman güzel!)
- Bütün büyük kredi kartları (AMEX dahil) – telefonla veya toplama
- Doğrudan banka havalesi
- PayPal
- Çek – koşuluyla teslim veya koleksiyon önce temizleyin
Ya bir şeyler ters giderse?
Biz don ’ t gibi şeyler yanlış ve kesinlikle denemeyeyim devam ’ t! Kalite bizim için çok önemli, ama olay bu var bir aksilik bizim
12 ay sınırsız kilometre garanti.
Bizim garanti parça ve işçilik öngörülemeyen koşullar nedeniyle bir bileşenin herhangi bir hata oluştuğunda için kapsar. Sadece arabanı bize geri getirmek ve çözmek.
hi
i am based in australia, i have a 98 freelander and the head gasket just went. land rover want $2000+ to fix it which is prohibitive and not possible.
i have plenty of mechanicl experience, but was wondering if there was anything special or tricky about replacing the gasket myself.
any advice would be appreciated.
thanks
brad
Hi Brad,
I assume given the year of your Freelander and the problem you have with it that it is a 1.8 litre petrol model. If you have plenty of mechanical experience then there is no particularly tricky issues in dealing with this models head gasket. Make sure you get the head skimmed and pressure tested at a machine shop and ensure that you use the modified multi layer head gasket and not the single layer one (otherwise you will find yourself with the same problem again within another 70,000 miles). Also ensure that you use an engine flush and a coolant flush on the system to get rid of any residues and check there are no blockages. Never use any sealing additives in these engine, such a K-seal, they cause havoc!
If you have any issues as you are replacing the head gasket just get in touch and we will do our best to help.
All the best,
Sue
+44-780-9575-421
hi is that true when head is skimed you also need new bolts?becose garage told me old bolts not doing the joob
for 1.8 freelander
Hi Valdas,
Yes, it is true. The bolts are stretch bolts and hence should not be reused.
All the best,
Sue
HI IM STUGLING WITH MY 1.8.
CANT SNAP HOW THE TIMING MARKS ON THE CAMS SEPOSE TO BE
Hi Gawie,
Apologies for the delay in responding.
When facing the engine from the drivers side the IN, marked on the cam shaft pulley on the left hand side, should face the EXHAUST, marked on the cam shaft pulley on the right hand side.
Using the mark on the back plastic cover, mounted on the head cylinder, align the crank shaft pulleys to the mark.
For more detailed help the Haynes manual can give you steps and diagrams (http://www.freelanderspecialist.com/freelander-service/freelander-1-service-and-repair-manuals)
All the best,
Sue
0780 9575 421